P250SIG.COM
»
.40
»
Issues - .40
»
New p250c trigger issue
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
Brand new gun had 80ish round's and the trigger seems to disconnect when attempting to pull it. Minimal pull effect and the trigger just clicks and the hammer dont move. I can duplicate the issue at home and can just rest my finger behind the hammer and it will do the same. I've removed the trigger module from the gun and can get it to do it outside the frame as well.
I took it to my dealer and he said yeah its deffinitly messed up. Said send it back to Sig cause its a warranty claim.
What kind of time frame do they normally take when sending something back?
|
|
|
|
|
|
Rank: Advanced Member
Joined: 9/16/2008(UTC)
Posts: 64
|
When he says it's "messed up" what did he say is the problem? A disconnected trigger bar?
|
|
|
|
|
|
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
He didnt pop it open but the trigger bar is riding over the edge it moves the hammer with. It attempts to grab but will pop right over. Almost forgot if I put pressure forward on the slide the trigger bar rides right over with alomst no resistance, if I pull the slide back a hair the trigger is normal.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 9/16/2008(UTC)
Posts: 64
|
You have to take out the FCU to make sure the trigger bar is seated properly on within the pins (hammer pivot and strut pins).
|
|
|
|
|
|
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
newsig wrote:You have to take out the FCU to make sure the trigger bar is seated properly on within the pins (hammer pivot and strut pins). Yeah I checked it already, everything is together perfect.
|
|
|
|
|
|
Rank: Uber Member
Joined: 4/2/2009(UTC)
Posts: 258
|
You should have it back in about two weeks (if your LGS doesn't drag his feet sending it back). Please keep us posted. Also, try to find out what the exact problem is if you can. That may take calling customer service after they have had it for a week. Ask for Victoria. |
| "I don't like repeat offenders, I like dead offenders." Ted Nugent
|
|
|
|
|
|
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
Sent it out Wed night. Tracking No shows they received it today. So far so good it got there 
|
|
|
|
|
|
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
Just got off the phone and they rteplaced the trigger bar assm in the p250 and it ship's back today 
|
|
|
|
|
|
Rank: Newbie
Joined: 4/10/2010(UTC)
Posts: 6
|
|
|
|
|
|
|
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
carmelk6 wrote:did the fix work? Dont know havent shot it since it came back but I could make it act up before dry firing and it doesnt act up now. I carry my Glock usually and stop to shoot on the way home work. I just keep forgetting to take it along.
|
|
|
|
|
|
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
I took it to the range today and it functioned perfectly for the 150rnd's I took with.
It does shoot low though, about 6 inchs @ 15 yrd's. It very well could be me, switching to my Glock put me right back on target but it has considerably less trigger pull. I did notice I was more comfortable shooting a bit faster with it than slow and easy. Seemed the more I though about it the more I was consistantly low. Fast no concentration shooting I was ringing 3 inch plates at 15yrds.
|
|
|
|
|
|
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
More range time yesterday with it. Trigger function is perfect still but it failed to extract 4 times in 200rnd's. Everytime I pulled the casing out with my fingernail and it worked fine afterwards. Extractor is showing signs on wear already WTF?
|
|
|
|
|
|
Rank: Uber Member
Joined: 4/2/2009(UTC)
Posts: 258
|
94krawler wrote:More range time yesterday with it. Trigger function is perfect still but it failed to extract 4 times in 200rnd's. Everytime I pulled the casing out with my fingernail and it worked fine afterwards. Extractor is showing signs on wear already WTF? What ammo were you using? This is an issue the 9mm's had when they first came out, so it may end up having to go back to Sig, worst case scenario. |
| "I don't like repeat offenders, I like dead offenders." Ted Nugent
|
|
|
|
|
|
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
Its only had American eagle, Blazer brass and 1 mag full Of Federal HST's through it. Round count is under 500 rnd's.
That would suck if it had to go back to Sig again.
|
|
|
|
|
|
Rank: Newbie
Joined: 4/10/2010(UTC)
Posts: 6
|
That's fast service, good on Sig. Seems like a lot of FTEs initially. How is it now?
|
|
|
|
|
|
Rank: Member
Joined: 3/3/2010(UTC)
Posts: 21
|
Its been good but it needs more range time. I still dont trust using it as a carry peice though.
|
|
|
|
|
|
P250SIG.COM
»
.40
»
Issues - .40
»
New p250c trigger issue
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
