Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Problem with my P250 .40
Options Go to last post  Go to last post Go to first unread  Go to first unread
Previous Topic Next Topic
sigster99 Offline
#1 Posted : Monday, May 04, 2009 9:00:26 AM(UTC)
Rank: Newbie

Joined: 12/10/2008(UTC)
Posts: 8
Hi All,

Anyone experiencing problem with the casing getting stuck in the barrel and won't eject?

It is next to impossible try calling Sig customer services. I just email them for the repair procedures.

Thx................
Back to top
dosborn81 Offline
#2 Posted : Monday, May 04, 2009 9:50:29 AM(UTC)
dosborn81

Rank: Uber Member

Joined: 4/2/2009(UTC)
Posts: 258
Have you tried different ammo? A guy at the range was having the same problem with his NIB Taurus Mellinium. I think he was shooting Blazers. I traded him a handfull of UMC's for his right arm and he had no more problems. Good thing he is left handed. LOL
"I don't like repeat offenders, I like dead offenders." Ted Nugent
Back to top
sigster99 Offline
#3 Posted : Monday, May 04, 2009 9:53:39 AM(UTC)
Rank: Newbie

Joined: 12/10/2008(UTC)
Posts: 8
Thx doborn81,

Yes, indeed I did try all different types of ammos, from the cheapest to the most expensive ones.....they all experienced problem.
Back to top
dosborn81 Offline
#4 Posted : Monday, May 04, 2009 10:08:19 AM(UTC)
dosborn81

Rank: Uber Member

Joined: 4/2/2009(UTC)
Posts: 258
Did this happen the first time you took it out or did it start all of a sudden??

Here's an obvious/stupid question..... It's clean, right?
"I don't like repeat offenders, I like dead offenders." Ted Nugent
Back to top
skabone Offline
#5 Posted : Monday, May 04, 2009 10:34:22 AM(UTC)
Rank: Uber Member

Joined: 1/19/2009(UTC)
Posts: 106
I just sent back my p250 9mm for failure to extract, the earlier versions were known for having FTE issues. from what I hear they just replace the extractor and the spring and its back to normal, I should know in a few days hopefully. It does take a while to get thru customer service but its not that bad, the customer service reps are pretty nice to talk to and are very helpful.
Back to top
sigster99 Offline
#6 Posted : Monday, May 04, 2009 11:00:44 AM(UTC)
Rank: Newbie

Joined: 12/10/2008(UTC)
Posts: 8
Thanks guys.....

dosborn81..yes...I do keep it very clean...lol. By the way, remember, there is no stupid question! It started to happen after appox. 30 rounds thru.

skabone, thanks for the tip. I will wait for Sig's reply. If no reply, I will give them a ring again. Just a quick question, did Sig send you the shipping label or did you pay it out of your pocket?

Again, thanks to all.....
Back to top
zender74 Offline
#7 Posted : Tuesday, May 05, 2009 2:43:17 AM(UTC)
zender74

Rank: Advanced Member

Joined: 10/8/2008(UTC)
Posts: 67
I was having the same problem on my 9mm compact and I emailed Sig with the problem. They emailed me back a UPS label and I had it back in a week with a new extractor and spring. I did take them some time to reply to my email tho.
Back to top
sigster99 Offline
#8 Posted : Tuesday, May 05, 2009 7:55:56 AM(UTC)
Rank: Newbie

Joined: 12/10/2008(UTC)
Posts: 8
That is comforting to know they are sending me the UPS label.....thx.
Back to top
sigster99 Offline
#9 Posted : Wednesday, May 06, 2009 3:16:04 AM(UTC)
Rank: Newbie

Joined: 12/10/2008(UTC)
Posts: 8
Call the CS at Sig and finally got to speak to a rep. Sending me the label.
Back to top
sigster99 Offline
#10 Posted : Thursday, May 07, 2009 12:11:15 PM(UTC)
Rank: Newbie

Joined: 12/10/2008(UTC)
Posts: 8
Got the label from Sig today...it is about time. Will ship it out tomorrow.
Back to top
skabone Offline
#11 Posted : Thursday, May 07, 2009 2:01:38 PM(UTC)
Rank: Uber Member

Joined: 1/19/2009(UTC)
Posts: 106
sigster99 wrote:
Got the label from Sig today...it is about time. Will ship it out tomorrow.

you'll have it back by the end of the week next week. I got mine back really quick.
Back to top
sigster99 Offline
#12 Posted : Friday, May 08, 2009 1:23:41 AM(UTC)
Rank: Newbie

Joined: 12/10/2008(UTC)
Posts: 8
Thank you....you guys are wonderful....
Back to top
rifmon Offline
#13 Posted : Sunday, May 10, 2009 12:51:06 PM(UTC)
Rank: Uber Member

Joined: 5/6/2009(UTC)
Posts: 149
skabone wrote:
I just sent back my p250 9mm for failure to extract, the earlier versions were known for having FTE issues. from what I hear they just replace the extractor and the spring and its back to normal, I should know in a few days hopefully. It does take a while to get thru customer service but its not that bad, the customer service reps are pretty nice to talk to and are very helpful.


Skabone,

I had the exact same problem. My 250 is in the 2500 serial number range (so I guess that qualifies it as an early one) and the first 150 rnds I fired had at least 30 FTEScared I sent it to SIG and they replaced the ejector and ejector spring just as you said. 300 rnds later, not a single failure to eject.ThumpUp

Let us know how how it all works out for you.
Back to top
sigster99 Offline
#14 Posted : Thursday, May 14, 2009 3:39:21 PM(UTC)
Rank: Newbie

Joined: 12/10/2008(UTC)
Posts: 8
Sent out my Sig P250 on Monday for FTE........got it back today on Thursday.....WHAT A FAST SERVICE!!!! KUDO TO SIG. Range time tomorrow....
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF 1.9.5.6 RC1 | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.536 seconds.